ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 56)

Specifications
Guppy PRO Technical Manual V4.0.0
54
Guppy PRO F-503B/C
Feature Specification
Image device Type 1/2.5 (diag. 7.13 mm) Micron/Aptina CMOS MT9P031 with
microlens
• Electronic rolling shutter (ERS)
• Global reset release shutter (GRR)
Effective chip size 5.7 mm x 4.3 mm
Cell size 2.2 µm x 2.2 µm
Picture size (max.) 2588 x 1940 pixels (Format_7 Mode_0)
Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

maximum protrusion: 10.1 mm

(see Figure 26: Guppy PRO C-Mount dimensions on page 68)
ADC 12 bit
Color modes Only color: Raw8, Raw12, Raw16, Mono8/12/16 (all F7 modes),
YUV411 (all F7 modes), YUV422 (all F7 modes)
Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps; 120 fps

variable frame rates in Format_7 up to 13 fps at full resolution

(up to ~ 830 fps at 64x64)
Gain control Manual:

0 ... 12.04 dB (~0.125/step (1.02 - 0.28 dB/step))

12.57 ... 18.06 dB (~0.5/step (0.53 - 0.28 dB/step))
Auto gain (select. AOI)
Shutter speed 20 µs … ~ 22.37 s
External trigger shutter Edge mode, programmable trigger delay
Look-up tables User programmable (12 bit  10 bit); default gamma (0.45)
Smart functions AGC (auto gain control), AEC (auto exposure control), autofunction
AOI, LUT, mirror, binning, low-noise binning mode, sub-sampling,
defect pixel correction, color correction, hue, saturation, 1 storable
user set

only color: AWB (auto white balance)
I/Os One configurable input (optocoupled),

three configurable outputs (optocoupled)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s
Table 20: Specification Guppy PRO F-503B/C
Note

Maximum protrusion means the distance from lens flange to
the glass filter in the camera.