ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 40)

Specifications
Guppy PRO Technical Manual V4.0.0
38
Specifications
Guppy PRO F-031B/C
Note

• For information on bit/pixel and byte/pixel for each
color mode see
Table 99: ByteDepth on page 200.
• Maximum protrusion means the distance from lens
flange to the glass filter in the camera.
Feature Specification
Image device Type 1/4 (diag. 4.5 mm) progressive scan SONY IT CCD ICX618AL/AQA
with EXview HAD microlens
Effective chip size 3.6 mm x 2.7 mm
Cell size 5.6 µm x 5.6 µm
Picture size (max.) 656 x 492 pixels (Format_7 Mode_0)
Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

maximum protrusion: 10.1 mm

(see Figure 26: Guppy PRO C-Mount dimensions on page 68)
ADC 14 bit
Color modes Only color: Raw8, Raw12, Raw16, Mono8, YUV411, YUV422, RGB8
Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps; 120 fps

Up to 123 fps in Format_7
Gain control Manual: 0-24.4 dB (0.0359 dB/step); auto gain (select. AOI)
Shutter speed 75 µs … 67,108,864 µs (~ 67 s); auto shutter (select. AOI)
External trigger shutter Programmable, trigger level control, single trigger,

bulk trigger, programmable trigger delay
Look-up tables User programmable (12 bit  10 bit); default gamma (0.45)
Table 12: Specification Guppy PRO F-031B/C
Note

Maximum protrusion means the distance from lens flange to
the glass filter in the camera.