ALLIED Vision Technologies Guppy PRO F-503 User Manual
Page 15

Introduction
Guppy PRO Technical Manual V4.0.0
15
continued from last page
[continued]
V3.0.2
[continued]
18.05.12
Guppy PRO F-503:
•
F0M2 (120 fps), F0M5 (120 fps), F1M5 (60 fps) are only
available with electronic rolling shutter (wheras present
in both shutter modes). If using global reset release
shutter the camera runs these modes with half frame
rates only. See Chapter
Guppy PRO F-503B / Guppy PRO F-
•
Changed range in dB and increment length:
Manual gain range of the various Guppy PRO types
IR cut filter:
•
Changed IR cut filter to
(type Jenofilt 217):
see
Figure 6: Approximate spectral transmission of IR cut
filter (may vary slightly by filter lot) (type Hoya C5000)
V3.0.3
14.06.12
New frame rates from development:
Guppy PRO F-031
•
Guppy PRO F-031: 123 fps instead of 121 fps in F7M0, see
Table 12: Specification Guppy PRO F-031B/C
•
Guppy PRO F-031: 564 fps instead of 563 fps (AOI height
10, Raw12), see
Table 90: Frame rates (fps) of Guppy PRO
F-031 as function of AOI height (pixel) [width=656]
•
Guppy PRO F-031: 188 fps instead of 199 fps (F7M2,
Mono16), see
Table 69: Video Format_7 default modes
Guppy PRO F-031B / Guppy PRO F-031C
Guppy PRO F-032
•
Guppy PRO F-032: F7M0 (Raw8/Raw12/Raw16/YUV411/
YUV422/Mono8/Mono12/Mono16): 82 fps instead of
79 fps, see
Table 71: Video Format_7 default modes Guppy
Guppy PRO F-033
•
Guppy PRO F-033: F7M0 (RGB8): 85 fps instead of 84 fps.
F7M0 (RGB8): 67 fps instead of 66 fps. See
Video Format_7 default modes Guppy PRO F-033B / Guppy
PRO F-033C
•
Guppy PRO F-033: 85 fps instead of 84 fps. See Chapter
to be continued on next page
Version
Date
Remarks
Table 1: Document history