ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 11)

Introduction
Guppy PRO Technical Manual V4.0.0
11
continued from last page
V2.0.2 05.04.11 • Revised video formats of Guppy PRO F-503 Table 85: Video
Format_7 default modes Guppy PRO F-503B / F-503C on
page 180
• Added exposure time offset for Guppy PRO F-503 Table 61:
Camera-specific exposure time offset on page 154
• Added On request: power out 6 W (HIROSE) in all
specification tables: see Chapter
Specifications on page
38 to 55
• Revised advanced register: input control (only one input)
in
Table 23: Advanced register: Input control on page 76
• Revised IO_INP_CTRL: ID 0x3..0x1F is Reserved in Table
24: Input routing on page 77
• Revised advanced register: output control (3 outputs) in
Table 29: Advanced register: Output control on page 82
• At register 0xF1000200 changed width and height: see
Table 126: Advanced register: Maximum resolution inquiry
on page 244
• YUV8: deleted description of data type straight binary:
Figure 35: Data structure of YUV8; Source: IIDC V1.31 on
page 92
• Y (Mono8/Raw8) are AVT own formats:

see Table 36: Y (Mono8) format: Source: IIDC V1.31 /
Y (Raw8) format: AVT on page 90
to be continued on next page
Version Date Remarks
Table 1: Document history