Auto white balance (awb) – ALLIED Vision Technologies Guppy PRO F-503 User Manual
Page 102
Description of the data path
Guppy PRO Technical Manual V4.0.0
100
Auto white balance (AWB)
The auto white balance feature continuously optimizes the color character-
istics of the image.
For the white balance algorithm the whole image or a subset of it is used.
Auto white balance can also be enabled by using an external trigger. How-
ever, if there is a pause of >10 seconds between capturing individual frames
this process is aborted.
AUTOFNC_AOI affects the auto shutter, auto gain and auto white balance fea-
tures and is independent of the Format_7 AOI settings. If this feature is
switched off the work area position and size will follow the current active
image size.
Within this area, the R-G-B component values of the samples are added and
used as actual values for the feedback.
The following drawing illustrates the AUTOFNC_AOI settings in greater detail.
Note
The following ancillary conditions should be observed for suc-
cessful white balance:
•
There are no stringent or special requirements on the
image content, it requires only the presence of equally
weighted RGB pixels in the image.
•
Auto white balance can be started both during active
image capture and when the camera is in idle state.
Note
Configuration
To set position and size of the control area
(Auto_Function_AOI) in an advanced register: see