Building defect pixel data, Figure 46: defect pixel, Correction: build and store – ALLIED Vision Technologies Guppy PRO F-503 User Manual
Page 116
Description of the data path
Guppy PRO Technical Manual V4.0.0
114
Building defect pixel data
The following flow diagram illustrates the defect pixel correction:
Note
•
Defect pixel correction is only possible in Mono8
modes for monochrome cameras and Raw8 modes for
color cameras.
•
In all other modes you get an error message in
advanced register 0xF1000298 bit [1] see
Advanced register: Defect pixel correction
•
Using Format_7 Mode_x: Defect pixel correction is done
in Format_7 Mode_x.
•
Using a fixed format (Format_0, Format_1 or
Format_2): Defect pixel correction is done in Format_7
Mode_0.
•
When using defect pixel correction with binning and
sub-sampling: first switch to binning/sub-sampling
mode and then apply defect pixel correction.
Figure 46: Defect pixel correction: build and store
Set resolution to
Format_7 Mode_x
with Raw8 or
Mono8 color
encoding
Or
Set resolution to
Format_7 Mode_0
with Raw8 or
Mono8 color
encoding,
when using fixed
modes.
Set AOI to max.
Choose threshold
Set BuildDPData
to 1
Set ON_OFF to 1
Optional:
Set MemSave to 1
Set values for
shutter, gain
to max.