ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 163)

Controlling image capture
Guppy PRO Technical Manual V4.0.0
161
In this case the camera can resynchronize the horizontal clock to the new
trigger event, leaving only a very short uncertainty time of the master clock
period.
Model Exposure start jitter
(while FVal) Exposure start jitter
(while camera idle)
Guppy PRO F-031
 14.2 µs  2.9 µs
Guppy PRO F-032
 24.3 µs  3.0 µs
Guppy PRO F-033
 23.4 µs  2.6 µs
Guppy PRO F-046
 27.4 µs  2.6 µs
Guppy PRO F-095
 35 µs  6.9 µs
Guppy PRO F-125
33.2 µs 5.0 µs
Guppy PRO F-146
 56.0 µs  13.7 µs
Guppy PRO F-201
 29.5 µs  10.3 µs
Guppy PRO F-503 not applicable not applicable
Table 67: Jitter at exposure start (no binning, no sub-sampling)
Note

• Jitter at the beginning of an exposure has no effect on
the length of exposure, i.e. it is always constant.