Autofunction aoi – ALLIED Vision Technologies Guppy PRO F-503 User Manual
Page 185
Video formats, modes and bandwidth
Guppy PRO Technical Manual V4.0.0
183
Autofunction AOI
Use this feature to select the image area (work area) on which the following
autofunctions work:
•
Auto shutter
•
Auto gain
•
Auto white balance
In the following screenshot you can see an example of the autofunction AOI:
As a reference it uses a grid of up to 65534 sample points equally spread over
the AOI.
Figure 77: Example of autofunction AOI (Show work area is on)
Note
Autofunction AOI is independent from Format_7 AOI settings.
If you switch off autofunction AOI, work area position and
work area size follow the current active image size.
To switch off autofunctions, carry out following actions in the
order shown:
1. Uncheck Show AOI check box (SmartView Ctrl2 tab).
2. Uncheck Enable check box (SmartView Ctrl2 tab).
Switch off Auto modes (e.g. Shutter and/or Gain)
(SmartView Ctrl2 tab).
Work area