ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 12)

Introduction
Guppy PRO Technical Manual V4.0.0
12
continued from last page
[continued]
V2.0.2
[continued]
05.04.11
• Video data formats now with subscript letters instead of
underscore as wrongly used in IIDC, see Chapter
Description of video data formats on page 89
• Revised spectral sensitivity for Guppy PRO F-031C: see
Figure 8: Spectral sensitivity of Guppy PRO F-031C
(without IR cut filter)
on page 57
• Defect pixel correction: you don’t need to set value for
brightness to max. any more: see
Figure 46: Defect pixel
correction: build and store on page 114 and Chapter Grab
an image with defect pixel data on page 115
• Max. resolution of Guppy PRO F-503B/C changed from
2592 x 1944 to 2588 x 1940:

see Chapter Guppy PRO F-503B/C on page 54 and Chapter
Video Format_7 default modes Guppy PRO F-503B / F-503C
on page 180
• Added Guppy PRO F-503 frame rate and bandwidth: see
Table 4: Bandwidth of Guppy PRO cameras on page 31
• Changed max. resolution of Guppy PRO F-503 from 2592 x
1944 to 2588 x 1940: see Chapter
Guppy PRO F-503B/C on
page 54
• Guppy PRO F-503: Mono8, YUV411 and YUV422 now in all
F7 modes available: see Chapter
Guppy PRO F-503B/C on
page 54
• Guppy PRO F-503: added minimum exposure time in Table
62: Camera-specific minimum exposure time on page 154
• Guppy PRO F-503: added shutter speed at full resolution:
see Chapter
Guppy PRO F-503B/C on page 54
• Guppy PRO F-503: added shutter speed: see Chapter Guppy
PRO F-503B/C on page 54
• Guppy PRO F-503: binning and sub-sampling in all F7
modes for b/w and color models: see Chapter
Guppy PRO
F-503B/C on page 54
• Guppy PRO F-503: added 800 Mbit/s: see Chapter Guppy
PRO F-503B/C on page 54
• Guppy PRO F-503: added exposure time for long-term
integration (extended shutter) up to 22 seconds: see
Chapter
Extended shutter on page 155
• Guppy PRO F-503: Revised chapter Chapter Mirror function
(only Guppy PRO F-503) on page 108
to be continued on next page
Version Date Remarks
Table 1: Document history