Pulse-width modulation (pwm), Only guppy pro f-503) – ALLIED Vision Technologies Guppy PRO F-503 User Manual
Page 270
Configuration of the camera
Guppy PRO Technical Manual V4.0.0
268
Pulse-width modulation (PWM)
Global reset release shutter
(only Guppy PRO F-503)
Note
•
A profile save operation automatically disables captur-
ing of images.
•
A profile save or restore operation is an uninterruptable
(atomic) operation. The write response (of the asyn-
chronous write cycle) will be sent after completion of
the operation.
•
Restoring a profile will not overwrite other settings
than listed above.
•
If a restore operation fails or the specified profile does
not exist, all registers will be overwritten with the
hard-coded factory defaults (profile #0).
•
Data written to this register will not be reflected in the
standard memory channel registers.
Note
See
Table 31: PWM configuration registers
Offset
Name
Field
Bit
Description
0xF10005C0 GLOBAL_RES_REL_SHUTTER Presence_Inq [0]
Indicates presence of this feature
(read only)
---
[1..5]
Reserved
ON_OFF
[6]
Global reset release shutter on/
off.
If off, then electronic rolling
shutter will be used.
---
[7..31] Reserved
Table 149: Advanced register: Global reset release shutter