Atec Agilent-E8364C - Manual (Page 63)

63
Test port cable specifications
continued
Connector Type Frequency Length 2 Return Insertion loss Stabillty 1,2 ±Phase
(Test port to device) (GHz) cm (inch) loss (dB) (f in GHz) ±magnitude (degrees)
Cable sets
(2.4 mm)
85133D semi-rigid cable set
2.4 mm 3 to DC to 50 53 (21 ) 15 dB 0.55 f +0.2 <0.06 dB 0.16 (f)
PSC-2.4 mm (f) or (3.7 dB at fmax)
2.4 mm (m)
85133F flexible cable set 2.4 mm 3 to DC to 50 72 (28) 12.5 dB 0.48 f +0.25 <0.17 dB 0.8 + 0.16 (f)
PSC-2.4 mm (f) or (3.64 dB at fmax)
2.4 mm (m)
85134D semi-rigid cable set 2.4 mm 3 to DC to 26.5 53 (21) 16 dB 0.31 f +0.2 <0.06 dB 0.18 (f)
PSC-3.5 mm (f) or (1.8 dB at fmax)
3.5 mm (m)
85134F flexible cable set 2.4 mm 3 to DC to 26.5 53 (21) 16 dB 0.31 f +0.2 <0.12 dB 0.13 (f) +0.5
PSC-3.5 mm (f) or (1.8B dB at fmax)
3.5 mm (m)
85135D semi-rigid cable set 2.4 mm 3 to 7mm DC to 18 53 (21) 17 dB 0.31 f +0.2 <0.06 dB 0.18 (f)
(1.5 dB at fmax)
85135F flexible cable set 2.4 mm 3 to 7 mm DC to 18 62.9 (24.75) 17 dB 0.31 f +0.2 <0.12 dB 0.13 (f) +0.5
(1.5 dB at fmax)
Single cable for
PNA (1.85 mm)
N4697E flexible cable 1.85 mm 3 to DC to 67 96.5 (38) 15 dB 1.9 dB/ft at 65 GHz <0.1 dB <0.5° (f) + 0.09°
1.85 mm (f)
Cable set for
PNA (1.85 mm)
N4697F flexible cable 1.85 mm 3 to DC to 67 72 (28) 15 dB 1.9 dB/ft at 65 GHz <0.06 dB <0.5° (f) + 0.04°
1.85 mm (f)
1. Phase stability of semi-rigid/flexible cables is specified with a 90-degree bend and a 4"/3" radius.
2. Cable length and stability are supplemental characteristics.
3. Special rugged female connector specifically for connecting to the network analyzer test port. Does not mate with a standard male connector.