Atec Agilent-E8364C - Manual (Page 36)

36
E8361C
Test port output
Description Specification Option 014 Option UNL Supplemental
Standard and Option 014 information
Frequency range
E8361C
10 MHz to 67 GHz (Operation up to 70 GHz)
Nominal power 1 -15 dBm -15 dBm -17 dBm
Frequency resolution 1 Hz 1 Hz 1 Hz
CW accuracy ± 1 ppm ± 1 ppm ± 1 ppm
Frequency stability ± 0.05 ppm -10 to 70 °C, typical
±0.1 ppm/yr maximum, typical
Power level accuracy 2
10 to 45 MHz 3 ±1.5 dB ±1.5 dB ±1.5 dB
45 MHz to 10 GHz ±1.5 dB ±1.5 dB ±1.5 dB Variation from nominal
10 to 20 GHz ±1.5 dB ±1.5 dB ±2.0 dB power in range 0
20 to 30 GHz ±2.0 dB ±2.0 dB ±2.5 dB
30 to 40 GHz ±3.0 dB ±3.0 dB ±3.0 dB
40 to 45 GHz ±3.0 dB ±3.0 dB ±3.0 dB
45 to 50 GHz ±3.5 dB ±3.5 dB ±3.5 dB
50 to 60 GHz ±4.0 dB ±4.0 dB ±4.0 dB
60 to 67 GHz ±4.0 dB ±4.0 dB ±4.5 dB
67 to 70 GHz 3 ±4.0 dB ±4.0 dB ±4.5 dB
Power level linearity 4
10 to 45 MHz 3 ±1.0 dB 5 ±1.0 dB 5 ±1.0 dB 5 For power -5 dBm
45 MHz to 67 GHz ±1.0 dB 5 ±1.0 dB 5 ±1.0 dB 5 Test reference is at the
67 to 70 GHz 3 ±1.0 dB 5 ±1.0 dB 5 ±1.0 dB 5 nominal power level
(step attenuator at 0 dB)
Power range 2, 6, 7
Note: If the power is set above maximum specified leveled power,
the test port output signal may show non-linear effects that are dependent on the DUT.
10 to 45 MHz 3 -25 to -9 dBm -25 to -9 dBm -75 to -9 dBm
45 to 500 MHz -25 to -3 dBm -25 to -3 dBm -75 to -3 dBm
500 to 750 MHz -25 to 0 dBm -25 to 0 dBm -75 to 0 dBm
750 MHz to 10 GHz -27 to -1 dBm -27 to -1 dBm -77 to -1 dBm
10 to 30 GHz -27 to -2 dBm -27 to -3 dBm -77 to -3 dBm
30 to 40 GHz -27 to -1 dBm -27 to -2 dBm -77 to -5 dBm
40 to 45 GHz -27 to -7 dBm -27 to -8 dBm -77 to -10 dBm
45 to 50 GHz -27 to -1 dBm -27 to -2 dBm -77 to -6 dBm
50 to 60 GHz -27 to -3 dBm -27 to -4 dBm -77 to -8 dBm
60 to 67 GHz -27 to -5 dBm -27 to -7 dBm -77 to -13 dBm
67 to 70 GHz 3 -27 to -5 dBm -27 to -7 dBm -77 to -13 dBm
Power sweep range (ALC)
10 to 45 MHz
3 16 dB 16 dB 16 dB
45 to 500 MHz 22 dB 22 dB 22 dB
500 to 750 MHz 25 dB 25 dB 25 dB ALC range starts at
750 MHz to 10 GHz 26 dB 26 dB 26 dB maximum leveled output
10 to 30 GHz 25 dB 24 dB 24 dB power and decreases by
30 to 40 GHz 26 dB 25 dB 22 dB the dB amount specified
40 to 45 GHz 20 dB 19 dB 17 dB
45 to 50 GHz 26 dB 25 dB 21 dB
50 to 60 GHz 24 dB 23 dB 19 dB
60 to 67 GHz 22 dB 20 dB 14 dB
67 to 70 GHz 3 22 dB 20 dB 14 dB
Power resolution 0.01 dB 0.01 dB
1. Preset power.
2. Test port output is a specification when the source is set to port 1, and a
characteristic when the source is set to port 2.
3. Typical performance.
4. Power level linearity is a specification when the source is set to port 1, and
a typical when the source is set to port 2.
5. ±1.6 dB for power > -5 dBm.
6. Power to which the source can be set and phase lock is assured.
7. Test port is specified into a nominal 50 .