Atec Agilent-E8364C - Manual (Page 32)

32
E8361C
Corrected system performance with 2.4 mm connectors continued
Description Specification (dB)
45 MHz to 2 GHz 2 to 20 GHz 20 to 40 GHz 40 to 50 GHz
Directivity 42 42 38 36
Source match
41 38 33 31
Load match 42 41 37 35
Reflection tracking ±0.001 (+0.02/°C) ±0.008 (+0.02/°C) ±0.020 (+0.02/°C) ±0.027 (+0.03/°C)
Transmission tracking ±0.040 (+0.02/°C) ±0.086 (+0.02/°C) ±0.123 (+0.02/°C) ±0.155 (+0.03/°C)
Transmission uncertainty (specifications)
Reflection uncertainty (specifications)
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
E8361C fully optioned 1 full two port cal using 85056A
45 MHz to 2 GHz
2 to 20 GHz
20 to 40 GHz
40 to 50 GHz
S11 = S22 = 0
Source power = -20 dBm
Uncertainty (dB)
Phase
0.1
1
10
100
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
E8361C fully optioned 1 full two port cal using 85056A
45 MHz to 2 GHz
2 to 20 GHz
20 to 40 GHz
40 to 50 GHz
S11 = S22 = 0
Source power = -20 dBm
Uncertainty (degrees)
Magnitude
0
0.01
0.02
0.03
0.04
0.05
0 0.2 0.4 0.6 0.8 1
Reflection coefficient (linear)
E8361C fully optioned 1 with 85056A
45 MHz to 2 GHz
2 to 20 GHz
20 to 40 GHz
40 to 50 GHz
S21 = S12 = 0
Source power = -20 dBm
Uncertainty (linear)
Phase
0
2
4
6
8
10
0 0.2 0.4 0.6 0.8 1
Reflection coefficient (linear)
E8361C fully optioned 1 with 85056A
45 MHz to 2 GHz
2 to 20 GHz
20 to 40 GHz
40 to 50 GHz
S21 = S12 = 0
Source power = -20 dBm
Uncertainty (degrees)
Fully optioned (E8361C with options 014/
UNL/080/081/016)
Applies to E8361C PNA Series analyzer, 85056A
(2.4 mm) calibration kit, 85133F flexible test
port cable set, and a full two-port calibration.
(Specifications apply over environmental tempera-
ture of 23 °C ±3 °C, with less than 1 °C deviation
from calibration temperature.)
1. Configurable Test Set, Extended Power Range and Bias-Tees, Receiver Attenuators, Frequency Offset Mode, and
Reference Channel Transfer Switch (Option 014, UNL, 016, 080 and 081).