Atec Agilent-E8364C - Manual (Page 39)

39
E8361C
Test port input
continued
Description Specification Option 014 or Supplemental
Standard Option 014 and UNL (typ.) information
Direct receiver access
input noise floor
1
10 Hz IF bandwidth
10 to 45 MHz
2 < -106 dBm
45 to 500 MHz 4, 5 < -105 dBm Online Help also includes the
500 MHz to 2 GHz < -125.5 dBm category “Direct receiver access
2 to 10 GHz < -125 dBm input noise floor, Option 080 enabled”
10 to 24 GHz < -128 dBm
24 to 30 GHz < -117.5 dBm
30 to 40 GHz < -117 dBm Option 016 degrades
40 to 45 GHz < -115 dBm performance by 2 dB.
45 to 50 GHz < -112.5 dBm
50 to 60 GHz < -111 dBm
60 to 67 GHz < -108 dBm Option 016 degrades
67 to 70 GHz 2 < -107 dBm performance by 3 dB.
1 kHz IF bandwidth
10 to 45 MHz
2 < -86 dBm
45 to 500 MHz 4, 5 < -85 dBm
500 MHz to 2 GHz < -105.5 dBm
2 to 10 GHz < -105 dBm
10 to 24 GHz < -108 dBm
24 to 30 GHz < -97.5 dBm
30 to 40 GHz < -97 dBm Option 016 degrades
40 to 45 GHz < -95 dBm performance by 2 dB.
45 to 50 GHz < -92.5 dBm
50 to 60 GHz < -91 dBm
60 to 67 GHz < -88 dBm Option 016 degrades
67 to 70 GHz 2 < -87 dBm performance by 3 dB.
Description Specification Supplemental
Receiver compression level (measured at Test Ports)
Supplemental
Specifications Information
Standard Option 014 Option 014 and UNL Typical
10 to 45 MHz 2, 3 negligible negligible negligible negligible
45 to 500 MHz 3, 6 <0.1 dB at -9.5 dBm 7 <0.1 dB at -9.5 dBm 7 <0.1 dB at -9.5 dBm 7 <0.1 dB at +0.5 dBm 7
and <0.25 dB at -3 dBm and <0.25 dB at -3 dBm and <0.25 dB at -3 dBm and <0.25 dB at +8 dBm
500 MHz to 5 GHz <0.1 dB at -8 dBm 7 <0.1 dB at -8 dBm 7 <0.1 dB at -7 dBm 7 <0.1 dB at -4 dBm 7
and <0.25 dB at -1 dBm and <0.25 dB at -1 dBm and <0.25 dB at 0 dBm and <0.25 dB at +3 dBm
5 to 30 GHz <0.1 dB at -8.5 dBm 7 <0.1 dB at -8.5 dBm 7 <0.1 dB at -6 dBm 7 <0.1 dB at -1 dBm 7
and <0.25 dB at -2 dBm and <0.25 dB at -2 dBm and <0.25 dB at +1 dBm and <0.25 dB at +6 dBm
30 to 67 GHz < 0.1 dB at -10.5 dBm 7 < 0.1 dB at -8 dBm 7 <0.1 dB at –9.5 dBm 7 <0.1 dB at -2 dBm 7, 8
and <0.15 dB at -7 dBm and <0.15 dB at -4 dBm and <0.15 dB at -6 dBm and <0.15 dB at +2 dBm 8
67 to 70 GHz 2 <0.1 dB at -2 dBm 7, 8
and <0.15 dB at +2 dBm 8
1. Total average (rms) noise power calculated as mean value of a linear magnitude
trace expressed in dBm.
2. Typical performance.
3. Coupler roll-off will reduce compression to a negligible level below 500 MHz.
4. Noise floor may be degraded by 10 dB at particular frequencies
(multiples of 5 MHz) due to spurious receiver residuals.
5. Specified value is for worst-case noise floor at 45 MHz.
6. Specified value is for worst-case compression at 500 MHz.
7. This compression level comes from the dynamic accuracy curve with -30 dBm
reference test port power.
8. Option 016 degrades performance by 3 dB.