Atec Agilent-E8364C - Manual (Page 27)

27
E8361C
Corrected system performance with 1.85 mm connectors continued
Description Specification (dB)
10 to 45 MHz 1 45 MHz to 2 GHz 2 to 10 GHz 10 to 20 GHz
Directivity 35 35 41 38
Source match
34 34 44 40
Load match 34 35 41 37
Reflection tracking ±0.019 (+0.02/°C) ±0.019 (+0.02/°C) ±0.010 (+0.02/°C) ±0.033 (+0.02/°C)
Transmission tracking ±0.177 (+0.02/°C) ±0.093 (+0.02/°C) ±0.053 (+0.02/°C) ±0.096 (+0.02/°C)
Transmission uncertainty (specifications)
Reflection uncertainty (specifications)
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
E8361C fully optioned 2 full two port cal using 85058B (Exp math)
10 to 45 MHz 1
45 MHz to 2 GHz
2 to 10 GHz
10 to 20 GHz
S11 = S22 = 0
Source power = -20 dBm
Uncertainty (dB)
Phase
0.1
1
10
100
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
E8361C fully optioned 2 full two port cal using 85058B (Exp math)
10 to 45 MHz 1
45 MHz to 2 GHz
2 to 10 GHz
10 to 20 GHz
S11 = S22 = 0
Source power = -20 dBm
Uncertainty (degrees)
Magnitude
0
0.01
0.02
0.03
0.04
0.05
0 0.2 0.4 0.6 0.8 1
Reflection coefficient (linear)
E8361C fully optioned 2 with 85058B (Exp math)
10 to 45 MHz 1
45 MHz to 2 GHz
2 o 10 GHz
10 to 20 GHz
S21 = S12 = 0
Source power = -20 dBm
Uncertainty (linear)
Phase
0
2
4
6
8
10
0 0.2 0.4 0.6 0.8 1
Reflection coefficient (linear)
E8361C fully optioned 2 with 85058B (Exp math)
10 to 45 MHz 1
45 MHz to 2 GHz
2 to 10 GHz
10 to 20 GHz
S21 = S12 = 0
Source power = -20 dBm
Uncertainty (degrees)
Fully optioned (E8361C with options 014/
UNL/080/081/016)
Applies to E8361C PNA Series analyzer,
85058B (1.85 mm) calibration kit, N4697F flexible
test port cable set, and a full two-port calibration.
(Specifications apply over environmental tempera-
ture of 23 °C ±3 °C, with less than 1 °C deviation
from calibration temperature.)
1. Typical performance.
2. Configurable Test Set, Extended Power Range and Bias-Tees, Receiver Attenuators, Frequency Offset Mode, and
Reference Channel Transfer Switch (Option 014, UNL, 016, 080 and 081).