Alpha Technologies Cordex Controller Ver.3.1x - Manual (Page 64)

0700015-J0 Rev B 62
6.6.5 Menu Items for Configuring Alarms Associated with Each Analog Input
6.6.5.1 Current Alarms
Battery Current High Setting for the battery amps alarm. When the total current to the battery
exceeds this setting, the alarm is activated and the message BATTERY
CURRENT HIGH is displayed on the GUI.
Load Current High Setting for the load amps alarm. When the current to the load has exceeded
this setting, an alarm is activated and the message LOAD CURRENT HIGH is
displayed on the GUI
6.6.5.2 Voltage Alarms
AC Mains High Activates an alarm when the AC exceeds the specified setting. The message
AC MAINS HIGH displays on the GUI.
AC Mains Low Activates an alarm when the AC input to the power system falls below the
specified setting. The message AC MAINS LOW displays on the GUI.
High Voltage [1-2] Activates an alarm when the power system DC voltage exceeds the specified
value. The message HIGH VOLTAGE 1 (or 2) displays on the GUI.
Low Voltage [1-2] Activates an alarm when the power system DC voltage falls below the
specified value. The message LOW VOLTAGE 1 (or 2) displays on the GUI.
Midpoint Monitor [1-5] Activates an alarm when the voltage reading (1 through 5) exceeds the
specified setting (from the midpoint). The message MIDPOINT MONITOR 1 (or
2-5) displays on the GUI.
6.6.5.3 Battery Alarms
Battery Runtime Low Allows specification in hours when the battery runtime alarm will activate with
respect to the hours remaining in the battery runtime prediction.
Battery Capacity
(Remaining) Low Allows specification of the battery capacity alarm trigger point as a
percentage. When the capacity of the battery is depleted to this specified
value, the capacity alarm is activated.
Battery Overtemp Activates an alarm when the specified temperature is reached.
Battery On Discharge Activates an alarm when the battery is on discharge; e.g., during AC Fail or
BT mode.
Battery Test Activates an alarm when the Battery Test is in progress.
Boost Mode Activates an alarm when BST mode is activated.
6.6.5.4 Temperature Alarms
Temp Sensor Fail [1-4] Activates an alarm when any temperature sensor fails
TC Sensor Fail Activates an alarm when a sensor, enabled for Temp Comp, fails