Alpha Technologies Cordex Controller Ver.3.1x - Manual (Page 49)

47 0700015-J0 Rev B
6.4.5 Set Inputs
This submenu enables the supervisor to set the AC and DC input parameters shown in the following
screen capture:
Select Submit to save changes. Select Discard to discard all changes made (including invalid settings).
Figure 46 — Set input window
6.4.6 Manage Configuration File
The inverter settings have their own configuration file and are not part of the full site configuration file.
Refer to factory default tables: Table P, Table Q, and Table R.
1. To transfer Inverter Settings to another system, first save the inverter configuration file to a local disc
( Main Menu > Inverters > Manage Config File ).
2. Then upload the file to the system at another site.
Figure 45 — Inverters – Manage Configuration File
WARNING : Modifying the configuration settings, using a text editor, can have dire consequences and
should be undertaken by advanced users only.
1
2