Alpha Technologies Cordex Controller Ver.3.1x - Manual (Page 26)

0700015-J0 Rev B 24
4.7 Rectifiers (and Converters) Information
4.7.1 Inventory Update
This button enables the user to re-acquire all the attached modules to the CXC and verify the existence of
all connected modules.
Tapping this button updates the inventory and returns the user to the home page. A pop-up window ap-
pears over the home page to show a progress bar of the number of modules acquired during the update.
Tapping the X button clears the pop-up from the active area.
Inventory update must be done whenever a module is removed from the system. The system is polled
with respect to the following scenarios:
• Module has failed and is no longer able to communicate, or
• User has removed a module from the system.
4.7.2 Rectifier Report (Converter Report similar)
Tap the Rectifier Report button to generate a report of all acquired modules in the system.
A new operations window appears with a list of the rectifiers in the system. The first column lists the serial
numbers of the modules. The report then displays the current output (A) of each module (or toggle for %
of maximum output) and the number of active alarms. The right most column displays the number of set-
tings out of tolerance (OOT per web interface).
FL + TC 54.00V 250A
Inventory Update
Rectifier Report
Converter Report
Select operation here
Alarm Indication
Return to previous screen
Figure 16 — Update (inventory) and report selection screen
Figure 17 — Rectifier (or Converter) report screen
Rectifier (or Converter) Locate Feature
Once a module is selected, the (module)
LEDs flash briefly.
Select a module and then tap View
Details to produce a new window
with pull-down menus showing all of
the alarms and settings that are out of
tolerance
Report headings for serial number, current
display (% or A), number of alarms and set-
tings out of tolerance (OOT)
A value of ‘---‘ indicates Comms Lost
FL + TC 54.00V 250A
Return to previous screen
Tap the rectifier display area to
enter an operation window for
converter/rectifier updates and
reports.