Extron Electronics VTG 400D_400 DVI User Guide - Manual (Page 62)

Serial Communication, cont’d
VTG 400D/400 DVI • Serial Communication 3-26
Using the Emulation Mode
The VTG 400/400D/400 DVI Control Program features an emulation mode so
that you can configure the VTG before actually using it on site. In emulation
mode, you can save the emulated settings to a configuration file, then load that
configuration file to the VTG.
1 . Start the control program. In the Comm Port Selection screen, select
Emulation Mode, then click OK.
2. You can create a new configuration starting from the default settings (see
2a), or you can base the configuration on an existing setup (see 2b).
2a. If you will be creating a brand new configuration, enter a new file name
and select Save (as shown below) instead of following step 2b.