Extron Electronics VTG 400D_400 DVI User Guide - Manual (Page 31)

2-21 VTG 400D/400 DVI • Installation and Operation
Video output range and rate buttons
Pressing the Video Range button selects from among eight output range
categories. Pressing the and Video Rate buttons selects an output rate for the
chosen output range. The output rates are displayed two at a time on the LCD.
See the following illustration.
Use the Rate buttons to select the rate.
Power
on
RES: VGA 640x480
FRQ: 31.50kHz 60.00Hz
PAT: Fine Crosshatch
SIG: Pink noise FRQ: N/A
LEV: -10 dBu 245mV
VTG 400
VIDEO TEST GENERATOR
60-564-01 Ver. 1.00
3 sec.
RATE
SELECT
RANGE
Press the Range button to select from
among the following rate types:
• PC
• CAD Workstation
• Stereographic
• Super High Res.
• 16:9 High Res.
• HDTV
• Video/Other
• Custom
VESA12 1280x1024
91.10kHz 85.00Hz
SXGA+ 1400x1050
63.90kHz 60.00Hz
PC RATES
Press the Select
button to activate the
selected rate.
NOTE After pressing the Select button or after 15
seconds of inactivity, the VTG will return to
the default menu.
Video output range and rate selection buttons
After selecting the desired rate, press the Select button to activate the selected
rate.
The VTG returns to the default menu after pressing the Select button or after
15 seconds of inactivity.