Menu overview, Vtg 400 – Extron Electronics VTG 400D_400 DVI User Guide User Manual
Page 21

2-11
VTG 400D/400 DVI • Installation and Operation
Menu overview
The default screen appears on the LCD when the unit is first powered on, as
shown here.
Power
on
RES: VGA 640x480
FRQ: 31.50kHz 60.00Hz
PAT: Fine Crosshatch
SIG: Pink noise FRQ: N/A
LEV: -10 dBu 245mV
VTG 400
VIDEO TEST GENERATOR
60-564-01 Ver. 1.00
3 sec.
Default menus during initial power up
If no top panel buttons are pressed within a 15-second timeout period, the
following menu is displayed. Both audio and video information are displayed.
RES: VGA 640x480
FRQ: 31.50kHz 60.00Hz
PAT: Fine Crosshatch
SIG: Pink noise FRQ: N/A
LEV: -10 dBu 245mV
Default menu after 15-second timeout
The main menus are shown in the following flowchart. The main menus for the
VTG 400D and VTG 400 DVI are identical. Use the Menu button to scroll
between main menus.
From any menu or submenu, after 15 seconds of inactivity the VTG saves all
adjustment settings, and times out to the default screen.
AUDIO
SETUP
MENU
MENU
VIDEO
SETUP
MENU
ADVANCED
SETUP
MENU
NEXT
MENU
EXIT MENU
Press "NEXT" button
Power
on
RES: VGA 640x480
FRQ: 31.50kHz 60.00Hz
PAT: Fine Crosshatch
SIG: Pink noise FRQ: N/A
LEV: -10 dBu 245mV
Main menus for the VTG