Extron Electronics VTG 400D_400 DVI User Guide - Manual (Page 26)

Installation and Operation, cont’d
VTG 400D/400 DVI • Installation and Operation 2-16
Blue
Black
Green
Cyan
Red
Magenta
Yellow
White
off
off
off
off
on
on
on
on
off
off
on
on
off
off
on
on
on
off
off
on
off
on
off
on
Color Combinations R G B
Advanced Setup menu
The following flowchart describes the Advanced Setup menu.
ADVANCED
SETUP
MENU
MENU
MENU
NEXT
Power
on
RES: VGA 640x480
FRQ: 31.50kHz 60.00Hz
PAT: Fine Crosshatch
SIG: Pink noise FRQ: N/A
LEV: -10 dBu 245mV
ADVANCED SETUP: <1 of 4>
Time-out Interval:
Never timeout
Screensaver Mode:
Cycle ADVANCED SETUP: <2 of 4>
LCD Display Contrast:
038
LCD Backlight:
Always On
NEXT
NEXT
or
NEXT
NEXT
Blank
ADVANCED SETUP: <3 of 4>
Internal Temperature:
-32.0F -00C
Native Rate For DVI Device
1600x1200 @60 Hz
ADVANCED SETUP: <3 of 4>
Internal Temperature:
-32.0F -00C
ADVANCED SETUP: <4 of 4>
SYSTEM RESET
NO YES YES
ADVANCED SETUP: <4 of 4>
SYSTEM RESET
NO YES
NO
YES YES
CONFIRM!
YES
Unit Reset to
Factory Default
NOTE All models except the VTG 400 DVI display
the menu above. NOTE Only the VTG 400 DVI displays the
menu above.
– OR –
(see notes below)
Auto
Advanced Setup menu
Advanced Setup submenu (1 of 4)
The screensaver timeout interval can be specified and the screensaver mode can
be set to either a blank (black)/muted screen or a cycle of test patterns from this
submenu.
Time-out Interval
Specify the screensaver timeout interval: