beautypg.com

Specifications, Specifications and part numbers, Specifications and part numbers, cont’d – Extron Electronics PIP 444 User Guide User Manual

Page 58

background image

Specifications and Part Numbers, cont’d

PIP 422 and PIP 444 Picture-in-Picture Processors • Specifications and Part Numbers

A-2

Specifications and Part Numbers

Video

Gain ............................................... Unity
Differential phase error .............. 1.5º at 3.58 MHz and 4.43 MHz
Differential gain error ................. 1.5% at 3.58 MHz and 4.43 MHz

Video input and loop-through

Number/signal type

PIP 444 ............................... 4 component video, S-video, composite video inputs

4 identical, buffered loop-throughs

PIP 422 ............................... 2 component video, S-video, composite video inputs

2 identical, buffered loop-throughs

Connectors

PIP 444 ............................... 4 x 3 female BNC for inputs

4 x 3 female BNC for loop-throughs

PIP 422 ............................... 2 x 3 female BNC for inputs

2 x 3 female BNC for loop-throughs

Nominal level ............................... 1 Vp-p for Y of component video and S-video

1 Vp-p for composite video
0.7 Vp-p for R-Y and B-Y of component video
0.7 V p-p for C of S-video

Minimum/maximum levels ...... 0.3 V to 2.0 V p-p with no offset
Impedance .................................... 75 ohms
Horizontal/vertical frequency .. NTSC 3.58, NTSC 4.43, PAL, SECAM
Resolution range .......................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Return loss .................................... <-30 dB @ 5 MHz
DC offset (min./max.) ................. -0.3 V to +1.3 V
External sync (genlock) ............... 0.3 V to 1.0 Vp-p

Video processing

Encoder ......................................... 10 bit digital
Digital sampling .......................... 24 bit, 8 bits per color; 80 MHz standard
Colors ............................................ 16.8 million
Anti-aliasing filtering .................. 5 levels: 0 (off), 1, 2, 3, auto (which uses 0-3)
Detail filtering .............................. 16 levels: 0-7, 8 (no filtering), 9-15

Video output

Number/signal type ................... 1 component video

1 S-video
1 composite video

Connectors .................................... 3 female BNC for component video

2 female BNC for S-video
1 female BNC for composite video

Nominal level ............................... 1 Vp-p for Y of component video and S-video

1 Vp-p for composite video
0.7 Vp-p for R-Y and B-Y of component video
0.7 V p-p for C of S-video

Minimum/maximum levels ...... 0.0 V to 1.0 Vp-p
Impedance .................................... 75 ohms
DC offset ....................................... 350 ±25 mV (max.) with input at 0 offset (for Y of component and S-video

and for composite video)
650 ±25 mV (max.) with input at 0 offset (for R-Y and B-Y of component
video and for C of S-video)

This manual is related to the following products: