Extron Electronics PIP 444 User Guide - Manual (Page 40)

Remote Control, cont’d
PIP 422 and PIP 444 Picture-in-Picture Processors • Remote Control 4-4
Symbol Definitions
= CR/LF (carriage return/line feed) (hex 0D 0A)
= Carriage return (no line feed, hex 0D)
• = Space character
Esc = Escape key (hex 1B)
X1 = Input number (1 - 2, PIP 422; 1 - 4, PIP 444):
1 = Input 1 3 = Input 3
2 = Input 2 4 = Input 4
X2 = On/off status:
0 = Off 1 = On
X3 = Input video format:
1 = Composite 3 = YUV
2 = S-video
X4 = Output standard:
1 = NTSC 3.58 2 = NTSC 0 IRE
3 = PAL
X5 = Color/tint value (000 – 127)
X6 = Brightness range (50 to 127)
X7 = Contrast range (38 to 107)
X8 = Window/image adjust mode (1 or 2):
1 = Window 2 = Image within window
X9 = Horizontal position — Window (0 to 720)
Image (–360 to +360)
X10 = Vertical position — Window (0 to 486 [NTSC] or 576 [PAL])
Image (–243 to +243)
X11 = Horizontal size — Window (16 to 360)
Image (–360 to +360)
X12 = Vertical size — Window (16 to 243 [NTSC] or 288 [PAL])
Image (–288 to 288)
X13 = Detail filter settings
(00 - 15 in order of increasing sharpness, 08 = Off [default])
X14 = Window preset (1 - 10, PIP 422; 1 - 20, PIP 444)
X15 = Window text
(16 characters max., can use ASCII characters 32-126)
X16 = Controller firmware version
(listed to two decimal places, i.e., x.xx)
?.?? = Invalid/not loaded x.xx* = Currently active firmware
X17 = Firmware partition:
1 = Factory microcontroller firmware
2 = Factory FPGA firmware
3 = Updated microcontroller firmware
4 = Updated FPGA firmware
X18 = Input standard (automatically detected):
0 = Unknown 3 = SECAM
1 = NTSC 4 = YUV 50
2 = PAL 5 = YUV 60
X19 = Firmware build number (4 digits, 0001 – 9999)
X20 = Temperature in degrees Fahrenheit*
X21 = Temperature in degrees Celsius*
* Available on new models only.
X22 = Window text position (0 - 6):
0 = Off 4 = Bottom left
1 = Top left 5 = Bottom center
2 = Top center 6 = Bottom right
3 = Top right
X23 = Window text style:
1 = Solid 2 = Translucent
X24 = Background color (1 – 8):
1 = White 5 = Magenta
2 = Yellow 6 = Red
3 = Cyan 7 = Blue
4 = Green 8 = Black
X25 = Border color (0 – 8):
0 = Off (no border)
1 = White
5 = Magenta
2 = Yellow 6 = Red
3 = Cyan 7 = Blue
4 = Green 8 = Black
X26 = Window effect type:
1 = Cut 3 = Dissolve
2 = Wipe
X27 = Anti-aliasing filter mode:
0 = No filter (off) 3 = Mode 3
1 = Mode 1 4 = Auto-adjust
2 = Mode 2 (mode based on image size)
X28 = RS-232 baud rate:
0 = 9600 baud 2 = 38,400 baud
1 = 19,200 baud 3 = 115,200 baud