Controls area, Control tab, Remote control, cont’d – Extron Electronics PIP 444 User Guide User Manual
Page 52
Remote Control, cont’d
PIP 422 and PIP 444 Picture-in-Picture Processors • Remote Control
4-16
Controls area
The controls area, figure 4-10, consists of four tabs, Control, Preset, Picture, and
Advanced, that allow you to perform many of the same functions as the PIP’s front
panel.
Figure 4-10 — Controls area, Control tab
Control tab
Figure 4-10 shows the controls area with the Control tab selected.
•
Windows Enable —
Select and deselect a window for display by clicking the
associated window’s button. A button appears green when selected and the
window appears in the graphic area of the screen. A button appears gray
when deleselected and the window does not appear in the graphic area.
•
Freeze Window —
Select and deselect an input to freeze or unfreeze that
input’s window in the displayed image. A button appears red when selected
(that input is frozen) and appears gray when deselected (the input video is in
motion).
•
Window Priorities —
Select a window button and click the < Back>> buttons to reorder the window priorities. The highest priority • Front Panel Lockout — Select the Disable or Enable radio button to unlock (Disable) or lock (Enable) the front panel. • Swap (PIP 422 only) — Click the Swap button to exchange the size, position, and priority information between windows 1 and 2.
window is to the left and the lowest priority window is to the right.