Input and output buttons – Extron Electronics MTPX Plus Series User Guide User Manual
Page 30
Input and Output Buttons
NOTE: See “
” for detailed descriptions of the following
operations.
Primary functions
Action
Select input or output for tie being created.
Indication
Blink: potential tie/untie.
Lit: current tie
Amber: video and audio tie
Green: video only tie
Red: audio only tie
1
2
3
through {highest numbered input or
output button}
Secondary functions
Action 1
Input 1 and Output 1:
Select I/O Group mode.
Action 2
Assign an input or output to the selected group.
Indication
Lit: Input or output is assigned to the selected group.
Action
Select a preset in Preset mode.
Indication
Lit: A preset has already been saved to this location.
Blink: Preset location is selected to be saved.
Action
Input buttons: Select the input for audio gain or attenuation adjustment.
Indication
Input buttons lit: Input audio selected for adjustment.
Indication
Output buttons lit or blinking: Indicate the input gain or attenuation level.
Action
Output buttons: Select the output for audio volume adjustment.
Indication
Output buttons lit: Output audio is selected for adjustment.
Indication
Input buttons lit or blinking: Indicated the output volume level.
Action
Output buttons:
Press and hold to mute or unmute the audio or RS-232 output.
Indication
Output buttons blinking: Output audio or RS-232 is muted.
Action
Input buttons: Toggle between audio or RS-232 as the pins 3 and 6 input.
Indication
Input buttons lit: RS-232
Unlit: audio
Action
Input 1 and Input 2 buttons:
Toggle between background
illumination or buttons unlit.
MTPX Plus Series • Operation
24