Extron Electronics MTPX Plus Series User Guide User Manual
Page 140
Setting up SMTP authorization
If desired, set the MTPX Plus to require SMTP authorization before accepting any e-mail as
follows:
1.
Click
Edit
. The button changes to
Save
.
2.
Check the
SMTP
Authorization
Required
check box, located below the
Domain
Name
field. This enables the
User
Name
and
Password
fields below the check box.
3.
Enter a user name and a password in the
User
Name
and
Password
fields. For the
MTPX Plus to accept their e-mail messages, senders must enter the user name and
password.
NOTES:
•
For the User name, any combination of letters, numerals, spaces, and
symbols except the comma (,) and the single and double quotation marks
(‘ and “) are valid. For the password, all characters except the comma are
valid. The user name and password can each be from 1 to 30 characters.
•
Both a user name and a password must be specified.
4.
Click Save to save the user name and password.
Deselecting SMTP authorization
Remove SMTP authorization as follows:
1.
Click
Edit
. The button changes to
Save
.
2.
Click (deselect) the
SMTP
Authorization
Required
check box.
3.
Click
Save
.
Domain Name field
The Domain Name field displays the domain name that the MTPX Plus switcher uses to log
on to the e-mail server. Standard domain name conventions (for example: xxx.com) apply.
NOTE: The
HTML language reserves certain characters for specific functions (see
“
“ in the “Programming Guide” section). The @ character is
acceptable only as the lead-in to the domain name (such as @folklore.net).
Email Address fields
The eight
Email Address
fields identify the e-mail addresses of the personnel to whom
the MTPX Plus switcher e-mails notification of its failure and repair status. Standard e-mail
address conventions (nnnnn@xxx.com) apply.
The
Fans
check boxes and drop boxes associated with each address field permit the
operator to specify specific criteria under which the switcher will e-mail recipients. Check
the
Fans
boxes to monitor the cooling. In the associated
EMail Options
drop box, select
whether the recipient is to be e-mailed of failures, fixes, both, not notified, or to be removed
from the e-mail list. The
Suspend
option is useful for temporarily removing personnel from
the e-mail list when they are unavailable, such as on travel or vacation. Deleting an e-mail
addressee and clicking the
Save
button removes the recipient from e-mail notification
completely.
MTPX Plus Series • HTML Operation 134