Extron Electronics Fiber Matrix 6400 - Manual (Page 73)

4-9 Fiber Matrix 6400 Switcher • Programmer’s Guide
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Create ties
N • Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).
•
The ! tie command, & tie command, and % tie command can be used interchangeably.
• The ! tie all command, & tie all command, and % tie all command can be used interchangeably.
Tie input X@ to output X# X@ * X# ! Out X#
• In X@
• All ] Tie input X@ to output X# .
Example: 1*3! Out03 • In01 • All
] Tie input 1 to output 3.
Tie input X@ to output X# X@ * X# & Out X# • In X@ • RGB ]
Example (see Note, above): 10*4& Out04 • In10 • RGB
] Tie input 10 to output 4.
Tie input
X@ to output X# X@
*
X#
% Out
X#
• In
X@
• Vid
]
Example (see Note, above): 7*5% Out05 • In07 • Vid
] Tie input 7 to output 5.
Quick multiple tie E
+Q
X@
*
X#
!...
X@
*
X#
!
}
Qik
]
Example: E +Q3*4!3*5%3*6! } Qik ] Tie input 3 to output 4,
tie input 3 to output 5, and
tie input 3 to output 6.
Tie input to all outputs X@ *! In X@ • All ]
Example: 5*! In05 • All
] Tie input 5 to all outputs.
Tie input to all outputs X@
*& In
X@
• RGB
]
Example (see Note, above): 8*& In08 • RGB
] Tie input 8 to all outputs.
Tie input to all outputs X@
*% In
X@
• Vid
]
Example (see Note, above): 10*% In10 • Vid
] Tie input 10 to all outputs.
Read ties
N The ! read tie command and & read tie command for RGB and the % read tie command for video can be used
interchangeably.
Read RGB output tie X#
!
X@]
Input
X@
is tied to output
X#
.
Read RGB output tie X#
&
X@]
Input
X@
is tied to output
X#
.
Read video output tie X#
%
X@]
Input
X@
is tied to output
X#
.
Channel mute commands
Channel mute X# *1B Vmt X# *1 ] Mute output X#
(no signal is output, but the
light output remains active).
Channel unmute X# *0B Vmt X# *0 ] Unmute output X#
(signal is output).
Read channel mute X#
B
X$] 1 = mute on, 0 = mute off.
Global channel mute 1*B Vmt1
] Mute all output channels.
Global channel unmute 0*B Vmt0 ] Unmute all output channels.
Command/response table for SIS commands
N
X@
= Input number 00 – 64 (00 = untied)
X#
= Output number 01 – 64
X$
= Mute 0 = off (unmuted)
1 = on (muted)