Extron Electronics Fiber Matrix 6400 - Manual (Page 138)

Fiber Matrix 6400 Switcher • Specifications, Part Numbers, Accessories B-2
Specifications, Part Numbers, Accessories
Specifications
N The Fiber Matrix 6400 I/O boards are class 1 laser products. They meet the safety regulations of
IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.
Optical specifications
Number/type ................................ 8 single mode or 8 multimode fiber optic inputs and outputs per I/O card
N Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is
required to transmit return data for bidirectional control/communication.
Connectors ..................................... 8 LC connectors per I/O card
Operating distance
Singlemode ......................... 30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode
Tx/Rx unit
Multimode .......................... 300 m (985') with 62.5 µm multimode (MM) cables with an Extron
multimode Tx/Rx unit
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode
Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser optimized multimode
cable with an Extron multimode Tx/Rx unit
N Operating distance is approximate. These are typical maximum distances that may vary
depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or
chromatic dispersion, environmental factors, and kinks
Nominal peak wavelength........... 850 nm for multimode (MM), 1310 nm for single mode (SM)
Transmission power
Singlemode ......................... -5 dBm, typical
Multimode .......................... -5 dBm, typical
Maximum receiver sensitivity
Singlemode ......................... -18 dBm, typical
Multimode .......................... -12 dBm, typical
Optical loss budget
Singlemode ......................... 13 dB, maximum
Multimode .......................... 7 dB, maximum
Maximum channel data rate ........ 4.25 Gbps
Video
Routing ........................................... 8 x 8 up to 64 x 64 unidirectional (Tx) matrix or
4 x 4 up to 32 x 32 bidirectional (Tx/Rx) matrix
Gain ................................................. Unity
Pixel data bit depth ....................... 8 bits per channel, 3 channels (R, G, B)
Maximum resolution .................... 1600x1200 @ 60 Hz, digitized pixel for pixel; higher resolutions up to
2048x1120, undersampled
Video/audio input
Number/signal type ..................... 8 to 64 fiber optic signals
Connectors ..................................... 8 LC connectors per I/O card
N Input comes from an Extron FOX 500 Tx transmitter, FOX 500 DA6, or FOX 500 DVI
transmitter.