Extron Electronics Fiber Matrix 6400 - Manual (Page 29)

3-3 Fiber Matrix 6400 Switcher • Operation
Input and output buttons
Primary functions
Action: Select input or output for tie being created.
Indications: Blink : potential tie/untie.
Lit : current tie
1 2 3
through
63 64
Secondary functions
I/O Grouping Action 1: Input 1 and Output 1 :
Select I/O Group
mode.
Action 2/
indication: Assign an input or output to the selected group.
Lit : Input or output is assigned to the selected group.
Presets Action/
indication: Select a preset in Preset mode.
Lit : A preset has already been saved to this location.
Blinking : Preset location is selected to be saved.
Output mutes Action/
indication: Outputs : Press and hold to mute the output.
Outputs, blinking : Output is muted.
Port
configuration
Action/
indication: Output 63 :
Select RS-232.
Blink : selected
Output 64 :
Select RS-422.
Blink : selected
Background
illumination
Action: Input 1 and Input 2 :
Toggle between background
illumination or buttons unlit.
a
Input buttons — The input buttons have two primary functions (•) and three
secondary functions (❏):
• Select an input.
• Identify the selected input.
❏ (Input 1 only) With the Output 1 button, select I/O Group mode. See
“I/O grouping” on page 3-17.
❏ Select a preset. See “Using presets” on page 3-21.
❏ (Input 1 and Input 2 only) Toggle background illumination of the buttons
on and off. See “Background illumination” on page 3-26.