Extron Electronics Fiber Matrix 6400 - Manual (Page 39)

3-13 Fiber Matrix 6400 Switcher • Operation
Example 3: Removing a tie from a set of ties
In the following example, an existing tie is removed from the current configuration.
The steps show the front panel indications that result from your action.
N This example assumes that you have performed example 1 and example 2.
1 . Clear all selections : Press and release the Esc button.
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
2 . Select an input : Press and release the Input 5 button.
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
INPUTS
Press and release the Input 5 button.
The button lights.
The Output 1, Outout 3, Output 4, and Output 8 buttons light
to indicate the ties created in example 1 and example 2.
3 . Select the output : Press and release the Output 4 button.
C O N T R O L
PRESET ENTER ESC VIEW
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
The Enter button blinks to
indicate the need to
confirm the change.
Press and release the Output 4 button.
The button blinks to indicate that the
selected input will be untied from this output.