Extron Electronics Fiber Matrix 6400 - Manual (Page 51)

3-25 Fiber Matrix 6400 Switcher • Operation
4 . Unmute the outputs :One at a time, press and hold the Output 3 button for
approximately 2 seconds until it lights steadily and then the Output 4 button.
The output 3 and output 4 signals are unmuted.
3
4
3
4
Unmute outputs one at a time.
2 seconds
2 seconds
The button returns to its previous indication
(lit, background illuminated, or unlit) to
indicate that the outputs are unmuted.
The button returns to its previous indication
(lit, background illuminated, or unlit) to
indicate that the outputs are unmuted.
Press and hold the Output 3 button.
Press and hold the Output 4 button.
5 . Exit View-only mode : Press and release the View button to exit View-only
mode.
All input buttons and output buttons
return to unlit or background illumination.
VIEW
Press the View button
to exit View-Only mode.
The View button returns to
unlit or background
illumination.
Locking out the front panel (Executive mode)
The front panel security lockout limits the operation of the switcher from the front
panel. When the switcher is locked, all of the front panel functions are disabled
except for the View-Only mode functions and selecting among the front panel Lock
modes. See “Viewing a configuration” on page 3-14. Other than in View-Only
mode, if the user pushes a front panel button when the switcher is locked, the View
and Preset buttons flash twice and return to their previous state.
To toggle the lock on and off, press and hold the Enter button and the Esc button for
approximately two seconds.
C O N T R O L
PRESET ENTER ESC VIEW
C O N T R O L
PRESET ENTER ESC VIEW
Press and hold the Enter and
Esc buttons simultaneously to
toggle executive mode on or off.
2 seconds
The Preset and View
buttons blink twice
to indicate the mode
change.
Release the buttons.