Extron Electronics Fiber Matrix 6400 - Manual (Page 40)

Operation, cont’d
Fiber Matrix 6400 Switcher • Operation 3-14
4 . Confirm the change : Press and release the Enter button.
ENTER
All input buttons and output buttons
return to unlit or background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button returns to
unlit or background
illumination.
The current configuration is now input 5 tied to output 1, output 3, and
output 8.
Input 5 video tied
to outputs 1, 3, and 8
Input
Output
1
3
8
5
Viewing a configuration
The current configuration can be viewed using the front panel buttons. The
View-only mode prevents inadvertent changes to the current configuration.
View-only mode also provides a way to mute outputs (see “Muting and unmuting
outputs” on page 3-23).
View the current configuration as follows:
1 . Press the Esc button to clear any front panel button indications that may be
on.
2 . Press and release the View button. All of the buttons light for outputs that are
not tied
3 . Select the desired input or output(s) whose ties you wish to view by pressing
the input and output buttons.
N • When you enter View-only mode, the output buttons light for all outputs
without ties. Likewise, when you press an output button for which there are
no ties, the output buttons light for all outputs without ties.
• To see all ties of the current configuration, press and release each input and
output button, one at a time.
• After 30 seconds of front panel inactivity, View-only mode automatically
ends.