Extron Electronics Fiber Matrix 6400 - Manual (Page 36)

Operation, cont’d
Fiber Matrix 6400 Switcher • Operation 3-10
Example 1: Creating a set of ties
In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the
front panel indications that result from your action.
N This example assumes that there are no ties in the current configuration.
1 . Clear all selections : Press and release the Esc button.
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
2 . Select an input : Press and release the Input 5 button.
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
INPUTS
Press and release the Input 5 button.
The button lights.
3 . Select the outputs : Press and release the Output 3, Output 4, and Output 8
buttons.
C O N T R O L
PRESET ENTER ESC VIEW
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink to indicate that the selected input will be tied
to these outputs.
The Enter button blinks to
indicate the need to
confirm the change.
N You can cancel the entire set of ties up to this point by pressing and releasing the
Esc button. The Esc button flashes once.
4 . Confirm the change : Press and release the Enter button.
ENTER
All input buttons and output buttons
return to unlit or background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button returns to
unlit or background
illumination.