Extron Electronics Fiber Matrix 6400 - Manual (Page 48)

Operation, cont’d
Fiber Matrix 6400 Switcher • Operation 3-22
4 . Confirm the change : Press and release the Enter button. The current
configuration is now stored in the selected memory location.
C O N T R O L
PRESET ENTER ESC VIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
save the preset.
All input buttons and output
buttons return to unlit or
background illumination.
Example 7: Recalling a preset
In the following example, a preset is recalled to become the current configuration.
The steps show the front panel indications that result from your action.
1 . Clear all selections : Press and release the Esc button.
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
2 . Select Recall Preset mode : Press and release the Preset button.
PRESET
1 2 3
17 18 19 32
16
Press and release the Preset button.
All input buttons with assigned presets light red.
Lit
(preset assigned)
Unlit
(no preset assigned)
3 . Select the preset : Press and release the input button for the desired preset.
C O N T R O L
PRESET ENTER ESC VIEW
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
INPUTS
The Enter button blinks
to indicate the need to
save the preset.
Press and release the Input 1 button.
The button blinks to indicate that this
preset number is selected but not recalled.