Extron Electronics Fiber Matrix 6400 - Manual (Page 116)

HTML Operation, cont’d
Fiber Matrix 6400 Switcher • HTML Operation 6-8
Passwords page
Access the Passwords page (figure 6-6) by clicking the Passwords link on the
System Settings page.
Select Firmware Upgrade
Select Email Settings
Refresh
Select System Settings
Figure 6-6 — Passwords page
The fields on the Passwords page are for entering and verifying administrator and
user passwords. Passwords are case sensitive and are limited to 12 upper-case and
lower-case alphanumeric characters. Each password must be entered twice; once
in the Password field and then again in the Re-enter Password field. Characters in
these fields are masked by asterisks (*****). If you do not want to password protect
an access level, leave the Password field and the Re-Enter password field blank.
After entering the desired password in both fields, click the Submit button.
N An administrator password must be created before a user password can be
created.
To clear an existing password so that no password is required, clear any existing
password, enter a single space character in the Password and Re-enter Password
fields, and click the Submit button.