beautypg.com

Definitions, Power, Definitions -8 power -8 – Extron Electronics Fiber Matrix 6400 User Manual

Page 34: Operation, cont’d

background image

Operation, cont’d

Fiber Matrix 6400 Switcher • Operation

3-8

Definitions

The following terms, which apply to Extron matrix switchers, are used throughout

this manual:

Tie —

An input-to-output connection.

Set of ties —

An input tied to two or more outputs. (An output can never be tied

to more than one input.)

Configuration —

One or more ties or one or more sets of ties.

Current configuration —

The configuration that is currently active in the

switcher (also called configuration 0)

Global memory preset —

A configuration that has been stored. Up to 64 global

memory presets

can be stored in memory. When a preset is retrieved from

memory, it becomes the current configuration. Presets can be saved and

recalled from the front panel and any of the serial or LAN ports. For front

panel operations, preset locations are assigned to the input buttons.

Room —

A subset of outputs that are logically related to each other, as

determined by the operator. The switchers support up to 10 rooms, each of

which can consist of from 1 to 16 outputs.

Room memory preset —

A configuration consisting of outputs in a single room

that has been stored. When a room preset is retrieved from memory, it

becomes the current configuration.

Power

Apply power by connecting one or both power cords (Primary and Redundant)

to the AC source(s). The switcher performs a self-test that flashes the front panel

button indicators red, green, red, and amber and then turns them either off or to

background illumination. An error-free power up self-test sequence leaves all

control buttons either unlit or showing background illumination.
The current configuration and all presets are saved in non-volatile memory. When

power is applied, the most recent configuration is retrieved. The previous presets

remain intact.
If an error occurs during the self-test, the switcher locks up. If your switcher locks

up on power-up, call the Extron S

3

Sales & Technical Support Hotline. See the rear

cover of this manual for the phone number in your region of the world.