Extron Electronics DMP 64 User Guide - Manual (Page 93)

4. To highlight another element or group of elements, repeat steps 2 and 3 as required.
5. To cut or copy, press the or key combination.
6. To save a preset, press , , , then ,
(see figure 57 below).
7. The Save a Preset dialog box appears.
a. to highlight the Preset Number field and type a specific number.
b. to highlight the Preset Name field and type a name.
NOTE: Unless entering a specific number and name, DSP Configurator
enters the next sequential unused preset number.
c. to highlight the OK button and press the key.
Alt T Enter
Figure 57. Saving a Preset Using Keyboard Navigation
DMP 64 • Software Control 87