Extron Electronics DMP 64 User Guide User Manual

Page 35

Once a processor is inserted, to view associated parameters that define the selected
processor (such as a frequency curve) or to remove the bypass, double-click on the
processor block. This action opens a new window with a dialog box that contains
parameters for the processor (see figure 21).

Figure 21.

Sample Processor Dialog Box

•

The

Set Defaults

button discards all custom settings and

reloads the default parameters.

•

The

Bypass

button temporarily suspends the processing without

without removing the processor block. Red indicates the processor is
bypassed.

By default, each processor block is bypassed when inserted (the

Bypass

button in the

processor dialog box is red). This can be changed for each processor block type, see

Tools>Options

and the specific defaults for the processor types.

NOTE: Figure 21 is an example of one type of dialog box. Contents and appearance

of each dialog box are unique to the processor type.

The block can be removed from the signal chain by selecting it with a single mouse click
and pressing the keyboard key or by right-clicking and selecting

Delete

DMP 64 • Software Control