Extron Electronics DMP 64 User Guide - Manual (Page 24)

3. When the installer has completed the installation of the USB drivers, the following
screen appears (see figure 14):
Figure 14. Successful USB Driver Installation
4. Click Finish .
USB driver installation is complete.
DSP Configurator Program Basics
Starting the Program
NOTE: Extron recommends connection via the Ethernet LAN port for running the
DSP Configurator program.
To run the DSP Configurator Program, click
Start > Programs > Extron Electronics > DSP Configurator > DSP
Configurator
.
The DSP Configurator program starts in Emulate mode (see figure 15, next page). Also
(see Emulate Mode and Live Mode on page 76) for details of mode operation.
Using the Program
In Emulate mode, audio parameters can be selected, then transferred to the DMP 64
by switching to Live mode (while connected to a DMP 64). Audio settings can also be
tailored while connected to the DMP 64 which allows real-time auditioning of the audio
output as adjustments are made (see
Emulate Mode and Live Mode on page 76).
DMP 64 • Software Control 18