Extron Electronics DMP 64 User Guide - Manual (Page 90)

Protected Configuration
A protected configuration is secured with PIN protection. The protected configuration
can be recalled by any user, but can only be written or overwritten using the assigned
4-digit PIN. Utilities for Save, Recall, and Change PIN, (separate from preset save), are
accessed from the
Tools menu as three sub-menus under a protected configuration
menu item.
Protected configuration menu items are only available in live mode from the
Tools >
Protected Configuration menu. These functions can only be performed in Live
mode:
• Save
• Recall
• Change Password
Save Protected Configuration
The default PIN is 0000 . The user can enter the default PIN or use the Change PIN (see
below) dialog box to create a new one.
Recall Protected Configuration
The dialog box prompts the user to continue. Click OK to continue or Cancel to cancel
the operation.
Change PIN
The change PIN utility allows the user to change a current protected configuration PIN.
The current PIN must be entered before changes are allowed.
DMP 64 • Software Control 84