Extron Electronics DMP 64 User Guide - Manual (Page 142)

Reference Information
This section contains reference information for the DMP 64, including:
• Firmware Loader
• DMP 64 Hardware Reset Modes
• Mounting the DMP 64
Firmware Loader
The DSP Configurator program includes a firmware loader
program which allows replacing the firmware without taking
the DMP 64 out of service. Download the desired firmware file
from the Extron website, (see
Firmware Upgrade Page on
page 127 for instructions.)
To access the firmware uploader:
1. Select Tools>Firmware Loader .
2. The Add Device dialog box appears. Type the IP
address of the DMP 64, then press OK .
NOTE: If the IP has not been changed, the
default IP address is: 192.168.255.255
DMP 64 • Reference Information 136