Extron Electronics DMP 64 User Guide - Manual (Page 127)

5. Press the keyboard key. The device checks to see if it is password-
protected.
a. If the device is not password-protected, it checks and downloads the HTML
pages (proceed to step 7).
b. If the device is password-protected, the device downloads the Connect to page
(see figure 62).
Connect to 192.168.254.254
DMP 64
User Name:
Password:
Remember my password
OK Cancel
Figure 62. Connect To Page
6. Click in the Password field and type in the appropriate administrator or user
password. Click the
OK button.
NOTE: A User Name entry is not required.
7. The device checks several possibilities, in the following order, and then responds
accordingly:
a. Does the address include a specific file name, such as 10.13.156.10/file_
name.HTML ? If true, the device downloads that HTML page.
b. Is there a file in the device memory named " index.HTML "?
If true, the device downloads "index.HTML" as the default startup page.
c. If neither of the conditions are true, the device downloads the factory-installed
default startup page, "
nortxe_index.HTML " (see figure 63 on the next page),
also known as the System Status page.
DMP 64 • HTML Operation 121