Xylem Magflux Electromagnetic Flow Meter - Manual (Page 59)

59
Electromagnetic Flow Meter
FW: 842018/842009
The available options are:
Login
Use the up/down keys to set the digits one by one. Continue with >
until all digits have been set and then press OK.
Activate/Deactivate
Write protection. Selecting "Activate" means that a password must
be entered to change vital settings. "Deactivate" disables password
protection
. If your current password is lost or forgotten, the password
protection can be overruled with the code "01750".
Change Password
The present 5-digit password can be changed as required.
Set Sensor Name
A unique name and/or number, a function or a location can be assigned
for a sensor (here: "MagFlux1"). It is consequently shown on the main
display with up to 4 display lines.
MagFlux1
Flow
32,5
m3/h
Cnt 1 312535 m3
Back Select Setup
1. Press the up/down keys to highlight the required menu line (here: Set
Sensor Name) and then press OK to select it.
Specify Main Screen
Factory Settings
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup
Back Select OK
Main Menu
Set Sensor Name