Xylem Magflux Electromagnetic Flow Meter - Manual (Page 13)

13
Electromagnetic Flow Meter
FW: 842018/842009
2. Safety, Repair and Product Identification
Safety instructions
1. Read this manual carefully.
2. Pay attention to the environment on the installation site.
3. Wear necessary protective equipment and follow all current safety
regulations.
4. The MagFlux ® can invoke a start signal for dangerous machinery.
Always ensure that connected machinery and other equipment are
effectively put out of service (that is to remove the main fuses and lock
main and security switches in off-position) before commencing configu-
ration, fault finding, servicing, maintenance work, etc.
5. WARNING: There is a risk of lethal, electrical shock from "Mains sup-
ply" terminals N and L. Be careful not to touch these terminals while
the MagFlux
® is being serviced.
Physical Mounting
The MagFlux ® flow converter/flow meter must not be mounted in
explosion hazardous areas!
Repair
Repair must only be made by MJK or by a service representative ap-
proved by MJK.