YSI IQ SensorNet 2020 XT Terminal - Manual (Page 28)

Safety instructions System 2020 XT USB
2 - 2 ba76019e01 12/2012
Special user
qualifications
The following installation activities may only be performed by a
qualified electrician:
 Connection of the MIQ/PS power supply module to the power line
(see MIQ/PS module manual).
 Connection of external, line voltage-carrying circuits to relay
contacts (see module manual of the relay output module).
2.2 Authorized use
The authorized use of the IQ S ENSOR N ET system consists only of its
use in online analysis.
Please observe the technical specifications according to chapter 8
T
ECHNICAL DATA . Only operation and running according to the
instructions in this component operating manual is authorized.
Any other use is considered to be unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.
2.3 General safety instructions
All components of the System IQ S ENSOR N ET are constructed and
inspected in accordance with the relevant guidelines and norms for
electronic instruments (see chapter 8 T
ECHNICAL DATA ).
They left the factory in a safe and secure technical condition.
Function and
operational safety
The failure-free function and operational safety of the IQ S ENSOR N ET
components are only guaranteed if the generally applicable safety
measures and the special safety instructions in this operating manual
are followed during their use.
The failure-free function and operational safety of the IQ S ENSOR N ET
components are only guaranteed under the environmental conditions
that are specified in chapter 8 T
ECHNICAL DATA .
If IQ S ENSOR N ET components are transported from a cold environment
into a warm environment, this can cause a functional malfunction
through the formation of condensation. In this case, wait for the
components to adjust to room temperature before recommissioning.