YSI IQ SensorNet 2020 XT Terminal - Manual (Page 121)

System 2020 XT USB Settings/setup
5 - 1 ba76019e01 12/2012
5 Settings/setup
5.1 Selecting the language
A list shows all the available system languages.
Fig. 5-1 Language
Note
If the selected system language is not available in a component, all
indications of this component (e.g. sensor, controller, terminal, output
module) appear in the standard language, English. To activate the
selected system language for this component, a software update of the
component is required. Contact YSI.
1 Using , open the Settings menu.
2 Using <
>, select the menu item, Language and
confirm with .
The Language display opens.
3 Select a language from the list with <
> and confirm
with .
The active language is marked with a tick.
4 Switch to the higher menu level with .
or:
Switch to the measured value display with .