YSI IQ SensorNet 2020 XT Terminal - Manual (Page 131)

System 2020 XT USB Settings/setup
5 - 11 ba76019e01 12/2012
Saving a password on
an electronic key
Simple access control
Extended access control:
1 Connect the USB memory device to the USB-A interface.
2 Using , open the Settings menu.
3 Using <
> and , select and confirm the menu
item, Access control -> .
The Access control dialog window opens.
4 Press < > and to select and confirm the menu
item, Change access control.
5 Press <
> and to select and confirm the menu
item, Save access code on USB memory.
The password for the system settings is saved on the USB
memory device.
1 Connect the USB memory device to the USB-A interface.
2 Using , open the Settings menu.
3 Using <
> and , select and confirm the menu
item, Access control -> .
The Access control dialog window opens.
4 Press <
> to select an authorization level and confirm
with .
5 Using <
>, select the menu item, Save access code on
USB memory and confirm with .
The password for the system settings is saved on the USB
memory device.