YSI IQ SensorNet 2020 XT Terminal User Manual

Page 111

System 2020 XT USB

Operation

4 - 33

ba76019e01

12/2012

Note
You can cancel the data saving process by selecting and confirming
Cancel with <

> and . The data will then not be stored on

the USB memory device.

Select the data to be saved with <

>.

 Save configuration
 Measured data storage
 Log book
 Calibration history

and confirm with .

The data is prepared for transmission.

Only for backing up the measurement data memory:

4-1

A list of sensors is displayed for which stored measured
values are available.

4-2

Using <

>, select the Selec. column. Confirm

with .
Using <

>, select the sensors. Place a

checkmark with . The measurement data of the
sensor is included in the backup.
Include further sensors in the list of measurement data
to be saved as necessary.

4-3

Terminate the selection of sensors with .

4-4

Using <

>, select the menu item, Transfer data

for selected sensors and confirm with .
A dialog box pops up for the selection of the decimal
separator for the exported *.csv file.

4-5

Using <

>, select the decimal separator (comma

or dot) for the measurement data. Confirm with .
A query pops up concerning the restart of the measured
value recording.

4-5

Using <

>, select Yes or No. Confirm with .

If the restart of the measured value recording is
selected, the measurement data stored in the
IQ S

ENSOR

is erased after storing. The measured

value recording is restarted.