YSI IQ SensorNet 2020 XT Terminal - Manual (Page 167)

System 2020 XT USB What to do if ...
7 - 7 ba76019e01 12/2012
"no sensor" in the
measured value display
though an IQ sensor is
connected
The selected system
language was not
activated for all
components
Cause Remedy
– Local display has been set up
and the IQ sensor is not included
in the local display
– Add the sensor to the local
display (see section 5.9)
– Switch to the All sensors
display with Display local
values or all values (see
section 4.4.5)
Cause Remedy
– A system language was selected
that is not available in one
component (sensor, controller,
terminal, output module).
The standard language, English,
was activated instead of the
selected system language.
– Contact YSI,
a software update is
required for the respective
components